XS Scuba Navigator Console - 3 Gauge Imperial

Looking for a complete analog instrument console in a compact boot format? The XS Scuba Navigation Console packs a pressure gauge, depth gauge and a compass module into a great ergonomically design console. Pressure gauge is a highly accurate bourdon tube design, reads pressure from 0 to 5,000 psi and features a built-in thermometer for temperature readings. Gauge has red highlighted readings from 0 to 500 psi for safety reserve air. Thermometer needle is brightly colored for ease of reading. Pressure gauge comes with a 36" (91.4cm) high pressure hose with 7/16" threaded end. The depth gauge is an air-filled steel diaphragm depth gauge with a 0' to 200' readout and maximum depth indicator needle (MDIN). The MDIN is pushed by the gauge depth needle until the diver meets their maximum depth. The MDNI will remain at the maximum depth reached for the duration of the dive to indicate the diver's deepest depth reached during the dive. This feature allows the diver to not record that depth while diving yet will be available upon surfacing for later calculations for repetitive dives. The colored graphics of the gauge face allow quick glance monitoring with bright red depth indicators at strategic positions on the gauge face. The red indicators are at depths beyond the standard sport limits of 130' to 200', warning the diver of the excessive depth. The highly accurate compass is calibrated for the northern hemisphere. The compass is liquid filled for a quick and responsive movement. A ratchet bezel with numerical compass headings in 30° increments and 10° indicator markings for calculating compass headings. The bezel has twin heading indicators for alignment of compass course and a lubber line across the compass face. A side window with compass degrees allows gun-sight accurate use when precise headings are required. All 3-gauge faces are luminescent for ease of reading in low light or night diving conditions and are housed in an impact resistant rubber gauge boot. Console is proudly made in the USA.

• Air filled depth gauge with maximum depth indicator needle (200 ft maximum or 60 m maximum)
• Submersible pressure gauge with built in thermometer (0 to 5000 psi or 0 to 420 bar)
• Highly accurate, top and side reading SuperTilt Compass
• Luminescent gauge faces
• Includes 36 in (91.5 cm) rubber hose